Hybrid film evaporator
Onda has recently developed a new innovative evaporator to respond to an increasing efficiency market demand and a reduced refrigerant charge to balance the continuous refrigerants cost and taxes increase.
The “Hybrid Film“ evaporator combines the benefits of the pool boiling reliable performance and the falling film evaporator low refrigerant charge.
The concept of this innovative heat exchanger has been developed by R&D and validated in Onda’s laboratory with turbo (no oil) and screw compressor (with oil).
The core design belongs to Onda’s IPR and it is patent pending
The Hybrid Film evaporator new distribution system allows to keep control of the refrigerant liquid around the tubes in all the different working
conditions, at full load and at part load as well. The amount of refrigerant liquid surroundings the tube is also optimized and reduced.
INFORMATION REQUEST
Our Facilities
Production Area: 8.000 m²
HEADQUARTER - SPECIAL PRODUCTS
Via Dante Alighieri, 27 B
36065 Mussolente (VI) Italia
Tel. +39 0424 87633
Fax +39 0424 578667
onda@wieland.com
Production Area: 1.500 m²
BPHE PRODUCTION
Via Vittoria, 158 A
36065 Mussolente (VI) Italia
Tel. +39 0424 87506
Fax +39 0424 87744
onda@wieland.com
Production Area: 9.000 m²
AIR AND S&T PRODUCTION
Via Lord Baden Powell, 11
36045 Lonigo (VI) Italia
Tel. +39 0444 720720
Fax +39 0444 720721
onda@wieland.com
Production Area: 4.500 m²
WIELAND ONDA USA L.L.C.
600 London Rd
Delaware, OH 43015
Tel. +1 614 321 3342
onda-us@wieland.com
Production Area: 1.800 m²
WIELAND ONDA NORDIC OY
Lentolantie 22
36220 Kangasala Tampere, Finland
Tel. +358 44 7022998
onda@wieland.com