Onda has recently developed a new innovative evaporator to respond to an increasing efficiency market demand and a reduced refrigerant charge to balance the continuous refrigerants cost and taxes increase.
The “Hybrid Film“ evaporator combines the benefits of the pool boiling reliable performance and the falling film evaporator low refrigerant charge.
The concept of this innovative heat exchanger has been developed by R&D and validated in Onda’s laboratory with turbo (no oil) and screw compressor (with oil).
The core design belongs to Onda’s IPR and it is patent pending.
The Hybrid Film evaporator new distribution system allows to keep control of the refrigerant liquid around the tubes in all the different working conditions, at full load and at part load as well.
The amount of refrigerant liquid surroundings the tube is also optimized and reduced
Part load: when moving < 80% of the load the hybrid lm is performing better with a reduced temperature approach with a positive impact on the chiller IPLV.
Similar performance is also expected with HFO R1234ze. Refrigerant charge reduction : the charge saving vs flooded is in a range of 35 – 40%.
You can download the catalogue in the link below :